Ultra-Pure UF Membrane

Ultra-Pure UF Membrane

View Product Literature and Specifications
(owner's manuals, drawings, info sheets, video files, etc.)

Miller-Leaman is committed to filtering, treating, and purifying our most precious resource... WATER. With less than 1 percent of the world's water being of fresh quality, we recognize the need to replenish and reuse our water supply. Some states have set optimistic goals for water reuse; Florida and California alone are expected to reuse over 1 billion gallons per day within the next few years.

Since 1991, Miller-Leaman and our strategic partners have been committed to investing in Research & Developemnt with the goal of generating unique, innovative, and reliable filtration products. Our Automatic Ultra-Pure UF Membrane Systems represent the newest such product.

The Ultra-Pure UF Membrane System was designed for Low Pressure, High Efficiency, Dead-End Filtration. With simplicity in mind, our turnkey systems are designed for easy installation and quick startup, efficient operation, and minimal maintenance. Equipped with our state-of-the-art menu-driven Maxim Backwash Controller, operation of the system is very user-friendly.

Our array of filtration products are used all over the world, in a variety of industries and applications. Whether it is with our new Ultra-Pure UF Membrane System or one of our other unique filtration products, we hope to be the solution to your next challenging filtration project. Call today to discuss your application.

APPLICATIONS:

Waste and Effluent Treatment
Recovery of Valuable Process Streams
Water Purification
Removing Suspended Solids, Turbidity, Bacteria & Viruses
Potable Water from Rivers, Ponds, Streams, etc.
Water Pre-Treatment
RO, Seawater Desalination, Ion Exchange
Wastewater Reuse from Many Industries -
Food Processing, Textile, Mobile Emergency Water
Purification, Process & Cooling Tower Make-up
Machining & Grinding Water Soluble Coolants
Wash Water / Rinse Water Recycling
Remove Haze Components from Juice, Wine, Beer (Clarification)
Milk and Dairy Processing
Replace Coagulation, Flocculation and Settling Process Media
Partial Dewatering
Landfill Leachate
Treatment of Dye Effluents
Surface & Ground Water Clarification
Car Wash Effluent

BENEFITS:

Removal of Bacteria / Viruses
Turbidity of < 1 NTU with 95% Recovery Rate
Removal of Total Suspended Solids > 0.1 Micron
Reduce SDI to < 3
Features High Performance Air Scouring Backwash
Minimal Operation and Labor Costs
Lower Capital Investment
Minimal Pretreatment & Chemicals Needed
Automated Design with Continuous Operation
High Concentration Minimizes Disposal Costs
Tangential Flow Along the Membrane Surface
Limits Membrane Fouling
Small Footprint & Easy Future Expansion

Membrane Specifications:

Configuration: Hollow Fiber (outside-in filtration)
Operating Temperature: < 122?F
Operating Pressure: < 15 PSI
pH Range: 2 - 11
Filtrate Turbidity: < 1 NTU / < 3 SDI
Flux Rate: 45 GFD maximum
(depends on feed water quality)
Fiber Size: Outer Diameter 2.0mm
(other sizes available)
Surface Area: 460 square feet per membrane
Membrane Casing: 8" Diameter x 60" Length
Material: Hydrophilic Modified PAN (Optional PVDF Membranes)
Operation: Dead-End Filtration with Air Scouring Backwash
Electrical: 230/380/460/575V / 50/60Hz / 1 or 3 Phase

System Specifications:

Model*	Flow Rate**	~Length	~Width	~Height	~Weight
ML-01	10 - 15 GPM	32"	28"	71"	176 lbs.
ML-02	20 - 30 GPM	32"	40"	87"	287 lbs.
ML-04	40 - 60 GPM	51"	41"	87"	507 lbs.
ML-06	60 - 90 GPM	79"	47"	87"	772 lbs.
ML-08	80 - 120 GPM	95"	47"	87"	1,036 lbs.
ML-10	100 - 150 GPM	110"	47"	87"	1,653 lbs.
ML-12	120 - 180 GPM	126"	47"	87"	1,940 lbs.
ML-14	140 - 210 GPM	148"	47"	87"	2,227 lbs.
ML-16	160 - 240 GPM	154"	47"	87"	2,513 lbs.
ML-18	180 - 270 GPM	165"	47"	87"	2,800 lbs.
ML-20	200 - 300 GPM	177"	47"	87"	3,087 lbs.

*Systems can be manifolded to achieve higher flow rates **Minimum and maximum flow rates depend on feed water quality

View Product Literature and Specifications
(owner's manuals, drawings, info sheets, video files, etc.)